| Core Components | Parameter Introduction |
|---|---|
| CPU | RK3568, quad-core 64-bit Cortex-A55, with a maximum frequency of 2.0GHz |
| GPU | ARM G52 2EE, supporting OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1, and embedded with high-performance 2D acceleration hardware |
| Memory | LPDDR4X 1GB/2GB (default)/4GB/8GB |
| Flash Memory | EMMC 8G (default)/16/32G/64G/128GB (optional) |
| Memory Expansion | Supports up to 128GB TF card expansion |
| Display Interface | Parameter Introduction |
| HDMI OUT Interface | HDMI2.0, with a maximum output of 3840x2160 |
| LVDS Interface | 1x LVDS interface (single-channel, 6-bit dual-channel, 8-bit dual-channel), with a maximum supported resolution of 1920×1080 |
| EDP Interface | 1x, with a maximum supported resolution of 1920×1080 |
| MIPI DSI Interface | 1x, with a maximum supported resolution of 1920×1080 |
| Audio Interface | Parameter Introduction |
| Headphone Jack Interface | 1x mono microphone input (analog signal input), 1x stereo audio output (analog signal output) |
| Power Amplifier Interface | Left and right stereo output, supporting 8Ω 10W dual speakers |
| Microphone Interface | 1x mono microphone input (analog signal input) |
| Network Support | Parameter Introduction |
| Ethernet | 1x standard RJ45 interface, 1x 2.0mm - 4P socket, 10/100M adaptive Ethernet, 1xPOE+RJ45 POWER SUPPLY(External adapter board) |
| WIFI/Bluetooth | On-board WIFI/BT module, supporting 2.4GHz/5GHz dual-band WiFi6 (optional), supporting 802.11a/b/g/n/ac protocols, and supporting Bluetooth 4.0 (supporting BLE) |
| Mobile Network | 1x built-in MINI PCI_E socket slot for expanding and connecting 3G/4G modules. GPS is optional, and 4G CAT1 and CAT4 modules are optional. |
| Basic Interfaces | Parameter Introduction |
| USB 2.0 | 5x USB Host interfaces (1x external standard USB 3.0 socket, 4x 2.0mm - 4P sockets) for connecting external high-definition USB cameras, sensors, USB flash drives, keyboards, mice, printers, and other devices |
| USB OTG | 1x USB OTG interface for system debugging and firmware updating, and can also be set to Host mode |
| Serial Ports | 4x serial ports, among which 3x are TTL (2x can be optionally configured as RS232 serial ports, 1x can be optionally configured as an RS485 serial port), and 1x TTL debugging serial port, supporting sensor access. |
| GPIO Pins | 5x IO pins, supporting input and output |
| On-board RTC | Supports real-time clock, powered by a 1220 coin cell battery |
| Timed Power On/Off | Supported |
| Hardware Watchdog | Supported |
| IIC Interface | 1x standard I2C interface, which can be used for touch, communication, and supports gyroscopes, etc. |
| Infrared Receiver | 1x infrared receiver head, supporting infrared remote control functions |
| Others | Parameter Introduction |
| Operating System | Android 11 (default)/debian/ubuntu18.04/ubuntu20.04/buildroot. The latest version supports domestic systems such as Star Kylin1.0 and OpenHarmonyOS 4.12. |
| Power Socket | 1x external DC12V input socket (DC - 5.5*2.5MM female socket), 1x 2.54mm - 6P input socket |
| Recommended Power Specification | 12V 2 - 5A (selected according to the power of peripheral devices) |
| System Upgrade | Supports PC/USB flash drive/TF card upgrade |
| Operating Environment | Parameter Introduction |
| Operating Temperature | Commercial grade: 0℃～70℃, recommended 5℃～35℃. Industrial grade: -30°C~80°C. |
| Operating Humidity | 10％～90％, without condensation |
| Storage Temperature | -30℃～75℃, recommended to store at room temperature |